На сайте 124226 инструкций общим размером 502.94 Гб , которые состоят из 6279702 страниц
Фото
Руководство пользователя SAMSUNG SH-S222A. Основные функции, характеристики и условия эксплуатации изложены на 1 странице документа в pdf формате.
Доступно к просмотру 1 страница. Рекомендуем вам скачать файл инструкции, поскольку онлайн просмотр документа может сильно отличаться от оригинала.
Safety Precautions Warning/Caution Introduction Connecting the Cables to the Super- DVD Writer Warning: To warn the user that failure to comply with the instructions may result in serious injury or death. DVD Writer SH-S222L(TS-H662L) The following are basic precautions to ensure user safety Caution: To caution the user that failure to comply with the instructions may result in • Design and specifications are subject to change without prior notice. and reduce the risk of property damage. damage to property. User Guide - ENGLISH Door Tray Eject Button Connecting the Cables When you install the drive FCC Compliance Place the drive on a level Do not drop the drive, and surface. • Never allow food particles or Front This equipment has been tested and found to comply with the limits for a Class B protect it fromsevere shocks. digital device, pursuant to Part 15 of the FCC rules. These limits are designed to • Failure to do so may cause the • Avoid high-humidity environments. • It can damage the drive or cause foreign substances to enter the Power cable provide reasonable protection against harmful interference in a residential installation. device to fall onto a hard surface, drive casing. This equipment generates, uses, and can radiate radio frequency energy and, if not it to malfunction. EIDE cable installed and used in accordance with the instructions, may cause harmful interference resulting in damage or malfunction. to radio communications. However, there is no guarantee that interference will not Master/slave select terminal occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter-mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Emergency hole LED • Re-orient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. If the compartment does not open • Connect the equipment into an outlet on a circuit different from that to While operating when you press the Eject button, which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. • If the power cable is not connected Do not move the drive while in operation and power off the computer, insert a pin properly, it may cause a fire or do not attempt to open the disc tray byforce. CAUTION damage the drive. Check the • To protect against the risk of or unfolded paper clip in the hole Change or modifications not expressly approved by the manufacturer responsible for • Avoid low- or high-temperature direction of the power connector and Make sure to close all working programs before fire, do ot spill such liquids as and push firmlhy) 1 Connecting the power cable compliance could void the user ’s authority to operate the equipment. environments. the drive incline before connection. attempting to open the tray and always use the • The 4-pin power cable from the internal power unit of your computer must open/close button. alcohol and benzene on the LASER STANDARD drive. be connected to the power terminal the rear of the DVD Writer. IEC 60825-1 :1993 +A1 :1997 +A2 :2001 Interface Port WEEE 2 Connecting the EIDE cable Correct Disposal of This Product (Waste Electrical &Electronic Equipment) +5V DC Ground (Applicable in the European Union and other European countries with separate collection systems) Ground +12V DC • Insert the EIDE cable, which is connected to the hard Do not insert a pin into the emergency disk to the interface terminal. This marking shown on the product or its literature,indicates that it should not be disposed with opening while in operation. other household wastes at the end of its working life.To prevent possible harm to the (Place the red line of the cable close to the Pin 1.) environment or human health from uncontrolled waste disposal,please separate this from other Other Rear Installing a jumper on the master/slave select terminal types of wastes and recycle it responsibly to promote the sustainable reuse of material 3 resources. Do not disassemble, attempt to • Connect a jumper to the rear side of the DVD Writer. Household users should contact either the retailer where they purchased this product,or their Handle with caution to prevent Do not use cracked, distorted or repair or modify the device without If the jumper is connected to MA (Master), it will work in the Master mode. local government office,for details of where and how they can take this item for environmentally • Do not place the drive in damage from external shock. damaged discs. express approval as directed in the If the jumper is connected to SL (Slave), it will work in the Slave mode. safe recycling. manual. direct sunlight. If the jumper is connected to CS (CSEL), you can control the device by using the Business users should contact their supplier and check the terms and conditions of the • To reduce the risk of damage, purchase contract. This product should not be mixed with other commercial wastes for electric shock, and fire. Master/slave select Port Power Port host interface signal CSEL. (In general, connection to MA is recommended.) disposal. CS : Cable Select(CSEL) • Samsung Eco-mark SL : Slave The Samsung’s own Eco mark helps consumers to easily understand that MA: Master Samsung develops eco-friendly products. This mark represents Samsung’s continuous effort to develop eco-friendly products. In particular, a disc with a crack on the inner tracks may break while in use. • RoHS (Restriction of the use of certain hazardous substances in electrical and electronic equipment). The RoHS, the environment regulation announced by European Union, • Any change or modification not expressly approved by designated qualified personnel could 1. Check to see that the disc does not have a crack before use. If the disc has a crack (especially around the center hole), it is recommended restricts the use of lead, mercury, cadmium, hexavalent chromium, PBB, and PBDE in void your authority to operate this device. that you make a copy immediately and use the copy instead. When a cracked disc is used continuously,the size of the crack is likely to products put on the market in The European Union after July 1, 2006. grow and it will eventually result in irreparable damage to the disc. Important to read and understand Do not disassemble - http://www.samsung-ODD.com at all times 2. Do not use low quality discs (i.e., illegal products, scratched or damaged discs). - http://www.samsung.com 1 2 3 4 Installing the Drive Using the Drive/Storing and Solving Technical Problems Technical Specifications Cleaning Your Discs When using one EIDE cable System Requirements • The friction noise generated during SPIN-UP and STOP is caused by the Using the DVD Writer Automatic Ball Balancing System(ABS) and is not a malfunction. Category SH-S222L(TS-H662L) • Connect the cable to the SL (Slave) of the Master/Slave Select Terminal at the rear DVD Writer of the DVD Writer. OS : Microsoft Windows 2000/XP/Vista DVD : DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-ROM, DVD-Video, DVD+R (Dual), DVD-R (Dual), LightScribe DVD±R,DVD-RAM. CPU : Pentium4 2.0GHz or above 1 Push the power button and boot the computer. The tray doesn't open. • See if the PC on. CD : CD-ROM, CD-R, CD-RW, CD-DA, CD+E(G) • Make sure the power cable within the PC is connected RAM : 256MB or above(Windows 2000/XP) properly. Usable Discs CD-MIDI, CD-TEXT, CD-ROM XA, Mixed Mode CD CD-I, Slave Drive (Choose the SL Jumper) After booting the computer, open the disc • If the tray still won't open with the power on, turn the power off DISC CD-I Bridge (Photo-CD, Video-CD), Multisession CD 2 and insert a pin(paper clip) into the emergency hole to open. (Photo-CD, CD-EXTRA, Portforio), LightScribe CD-R. Installing the DVD Writer compartment by pressing the Eject button. Disc Diameter 4.72 Inch or 3.15 Inch (120mm or 80mm) 3 Insert the disc (CD) with the label on the disc The tray doesn't close. • Make sure the disc has been inserted properly. Interface Interface Port PATA Support How to install the DVD Writer on your PC. First, remove the cover; Burst Transfer Rate 66.6MB/s (UDMA4) connect the cable to the DVD Writer and then to the PC. facing upwards and close the disc compartment The drive is not working properly. • See if the drive is connected properly to the PC. Access time CD-ROM 110ms (Random) • See if the device drive program has been installed properly. (Random) DVD-ROM 130ms (Random) MainBoard by pressing the Eject button. The indicator light Hard Drive 1 If necessary, attach a horizontal bracket to The Window OS can't detect the drive. • See if the device drive program has been installed properly. Media Type Setting Titles only The entire label area (including graphics) both sides of the drive. 4 comes on. • Can be an OS problem. Try reinstalling the Windows OS Disc Labeling Time CD Media Best Less than 3`30`` Less than 28` Play the disc (CD). program. When using two EIDE cable • You can purchase these accessories separately DVD Media Best Less than 3`30`` Less than 30` from your computer dealer. Media Type Write Read • Connect the cable to the MA (Master) of the Master/Slave Select Terminal at the rear (Screws for use: M3 X 6 X 4) Playing CD-DA/Audio CDs The system doesn't read the disc. • See if the system detects the drive. DVD+R CAV 22X CAV 16X • Make sure you use the types of discs that are supported of the DVD Writer. • Run the CD player program supplied with the sound card or play the DVD+RW ZCLV 8X CAV 12X by the drive. Windows Media Player. • See if the LED turns into green. DVD+R DUAL CAV 16X CAV 12X - If there is only one Optical drive: select MA (Master). • Make sure you inserted the disc with the label facing up. DVD-R DUAL CAV 12X CAV 12X Playing Video CDs DVD-R • Make sure you are using the right program for disc CAV 22X CAV 16X Master Drive (Choose the MA Jumper) • Follow the instructions provided with the disc. playback. Data transfer DVD-RW CLV 6X CAV 12X • A video card or MPEG software and a sound card need to be installed to view video CDs. • See if the disc is clean. DVD-ROM(Single) - CAV 16X 2 Remove the plate from a free expansion slot and install the • See if any congealing has occurred. rate(MAX) DVD-ROM(Dual) - CAV 12X SEC 1 • If the drive is vertically installed, you cannot use an 8 cm Mini Disc DVD Writer, as shown in the illustration. because the disc is movable. • Make sure the region code of the drive matches the disc DVD-RAM PCAV 12X PCAV 12X PRI 1 number. CD-ROM - CAV 48X • If you have no free expansion slot, install the drive in place of the Storing Your Discs CD-R PCAV 48X CAV 40X diskette drive. You can download the user manual and the related informations of software at the web site of US-RW ZCLV 32X CAV 40X Hard Drive MainBoard • Make sure to use the standardized screws supplied (M3X6). • Do not place a disc in direct sunlight. our customer support as below. HS-RW CLV 10X CAV 40X - To use screws other than M3X6 may result in malfunction. • Store a disc vertically in a well-ventilated and URL : http://www.samsung-ODD.com CD-RW CLV 4X CAV 40X -If there is two Optical drive, select MA (Master) / SL (Slave). stable location. - User Manual Download : Support > Download center > Web User Manual or User Manual Buffer Memory 2MB • Do not write or attach a label on a disc. Drive Installation Horizontal / Vertical Master Drive (Choose the MA Jumper) • Do not drop a disc or place heavy objects on it. - TruDirect Manual : Information > Software Quick Manual Operating Temperature 41°F ~ 122°F (5°C ~ 45°C) Slave Drive (Choose the SL Jumper) - Recording Software : Information > Flash Manual > Recording Software Environment Humidity 20% ~ 80% (RH) Size (Width x Height x Length) 5.34 X 1.65 X 6.69 Inch (148.2 X 42 X 170mm) SEC 1 - TruDirect Software Download : Support > Download Center > Software Cleaning Your Discs Weight 750g PRI 1 DVD Plate Writer Horizontal • Do not touch the surface • To clean a disc, polish lightly * Note) The maximum speed depends on the writing media condition Bracket of a disc; hold it by the from the inside of the disc to the (Choose the MA Jumper) (Choose the SL Jumper) or some of user's PC environment. Hard Drive edges. outside with a soft cotton cloth. MainBoard • The disc may not function properly if there are fingerprints, foreign substances or dust on the disc surface. 5 6 7 8 9