Фен-расческа VICONTE vc-3712. Инструкция на русском языке

AIR BRUSH
Instruction manual
?o?
??????????? ?? ????????????
VC-3712

DESCRIPTION
1. Round brush
2. Brush release button
3. 3 heat settings switch
4. Housing
5. Air inlet
6. Hanging loop
7. Cord swivel protection
IMPORTANT SAFEGUARDS
·   Please carefully read these instructions and keep them for future reference.
·   Home use only. Do not use for industrial purposes.
·   Always remove the plug from the socket whenever the device is not in use, when attaching accessory parts, cleaning the
device or whenever a disturbance occurs. Switch off the appliance beforehand. Pull on the plug not on the cord.
·   In order to protect children from the dangers of electrical appliances, never leave them unsupervised with the device.
Consequently, when selecting the location for your device, do so in such a way that children do not have access to the
device. Take care to ensure that the cord does not hang down.
·   Test the device and the cord regularly for damage. If there is damage of any kind, the device should not be used.
·   Do not repair the device yourself, but rather consult an authorized expert.
·   For safety reasons a broken or damaged mains lead may only be replaced by an equivalent lead from the manufacturer,
our customer service department or a similarly qualified person.
·   Keep the device and the cord away from heat, direct sunlight, moisture, sharp edges and suchlike.
·   Use only the original accessories.
·   Do not use the device outdoors.
·   Keep the device away from water and moisture such as, for example, bathtubs, shower areas or even persons taking a
bath. Such situations constitute a danger to life through electric shock.
·   Should the device become moist or wet, remove the mains plug from the socket immediately.
2

·   If, however, the airflow is inadvertently obstructed during use, the built-in thermal safety cutout will automatically switch
off the appliance. If the hairdryer shuts off automatically, unplug immediately and allow cooling for few minutes before
restarting. Make sure the ventilation openings are clean.
ATTENTION:
·   Keep your hair away from the immediate vicinity of the air inlet opening. Keep air inlet filter dust and fluff free.
·   Do not cover air inlet or air outlet otherwise the hair dryer may overheat.
·   The nozzles become hot during operation.
INSTRUCTION FOR USE
·   Fully unwind the cord.
·   Attach the nozzle:
-   curling iron;
-   half round brush;
-   tower brush;
·   To take off the nozzle press the brush release button and, hold on the button, pull up the nozzle.
·   Select desired heat setting using the 3 heat settings switch:
- 0 ± off;
- 1 - low temperature ± with this switch it is possible to interrupt heating process so that the air can be mixed according
to individual requirements;
- 2 ± medium temperature for gentle drying and shaping;
- 3 ± high temperature for rapid drying.
GIVING VOLUME
·   Spread your hair on locks and wind then up on round brush. Do not comb hair right after a curling,
give them preliminary to cool down.
CURLING
·   For curling spread your hair on locks and wind then up on round the thermal brush. Hot air will form
tight curls from your hair. Do not comb hair right after a curling, give them preliminary to cool down.
3