Фитнес-браслет JAWBONE UP2. Инструкция на русском языке

Quick Start Guide
1   Power Up
• PLUG IN JAWBONE FOR 50 MINUTES (YES, THERE’S AN AC ADAPTER IN THE BOX)
2   Pair
• PHONE BLUETOOTH® SETTING: ON
• JAWBONE AUTOMATICALLY GOES INTO PAIRING MODE FIRST TIME ON
• ALL OTHER TIMES: HOLD JAWBONE TALK AND NOISEASSASSIN™ BUTTONS: 2 SECONDS
• INDICATOR LIGHT FLASHES RED + WHITE
• PHONE: ‘SEARCH FOR NEW DEVICES’
• SELECT JAWBONE, ENTER PASSCODE ‘0000’
3   Share
• MAKE THAT CALL (GO CHANGE THE WORLD, WE KNOW YOU CAN)
Jawbone Overview
a  NoiseAssassin Button                              c  Voice Activity Sensor
b  Talk Button                                       d  Earbud
e  Earloop
note  Both Talk Button
and NoiseAssassin                                    The medium sized earloop and
Button are hidden                                    earbud are already fitted to
beneath the external                                 your Jawbone at the factory.
face of the headset. To
activate either button,
simply press on the
areas indicated above.
1  Charging
•  Charge the battery fully on first use.
•  Charge time 50 minutes.
•  80% charge after 35 minutes.
•  You can charge your Jawbone headset via              •  Indicator light is RED
the wall charger, or via USB on your computer.           while headset is charging / WHITE when headset
•  Place the Jawbone headset in the socket                 is fully charged.
with the jawbone logo facing upward.                  •  Indicator light flashes RED when battery is low.
(continue to page 2)

2  Pairing
•  Your Jawbone headset automatically goes into
pairing mode the first time you turn it on.
•  In pairing mode, the indicator light flashes
RED + WHITE
to pair for the first time                              to manually put your headset in pairing mode
•  Turn on your phone’s Bluetooth setting               •  Hold down the Talk Button and NoiseAssassin
•  Press the Talk Button for 2 seconds                      Button for 2 seconds until the indicator light
•  ‘Search for New Devices’                                 flashes RED + WHITE. (Headset must be
•  Select Jawbone                                           powered off to initiate).
•  Enter passcode ‘0000’                                •  Pairing mode lasts for 3 minutes, or until
successful pairing.
3  Fit
•  Jawbone comes with 4 earloops and 3 earbuds          •  Jawbone’s patented NoiseAssassin requires
for maximum comfort.                                      contact with your face. Make sure the Voice
•  To wear Jawbone, tuck earloop behind your ear,           Activity Sensor (VAS) is touching your face.
place earbud snugly inside your ear, and rest             If the VAS doesn’t touch your cheek, the headset
Voice Activity Sensor on your cheek as shown in           will not work properly.
the diagram.
4  Talk
•  Turn the Jawbone headset on or off by                •  To change the volume during a call, press the
pressing the Talk Button for 2 seconds.                  NoiseAssassin Button to cycle through the
multiple volume levels.
•  To answer a call, press the Talk Button.•
•  To turn noiseassassin off or back on during a call,
press the NoiseAssassin Button for 2 seconds.
•  To reject a call, press the NoiseAssassin                note  NoiseAssassin is always on by default.
Button while phone is ringing.
5  More
•  To initiate voice dialing, press the NoiseAssassin      •  To turn off the led, press the Talk Button 5
Button for 2 seconds in standby mode and then            times while in standby mode.
speak a command.
•  To answer an incoming call while on a call,
•  To redial last number called, triple-tap the             press the Talk Button.
NoiseAssassin Button.
For additional information visit jawbone.com/support
©2008 AliphCom. All Rights Reserved.