Видеомагнитофон SONY SLV-SE10EG. Инструкция на английском языке

3-865-174-12 (1)
Video Cassette
Recorder
Operating Instructions
PAL NTSC 4.43
SLV-SE10EG
SLV-SX10EG
©1999 by Sony Corporation

WARNING                             Caution
Television programmes, films, video tapes and
To prevent fire or shock hazard, do not expose  other materials may be copyrighted.
the unit to rain or moisture.       Unauthorized recording of such material may
To avoid electrical shock, do not open the  be contrary to the provisions of the copyright
cabinet.  Refer servicing to qualified a  laws.  Also, use of this recorder with cable
personnel only.                     television transmission may require
authorization from the cable television
Mains lead must only be changed at a qualified  transmitter and/or programme owner.
service shop.
Compatible colour systems
Precautions
This VCR is designed to record using the PAL
Safety                              (B/G or D/K) or MESECAM (B/G or D/K)
• This unit operates on 220 – 240 V AC, 50 Hz.  colour system and play back using the PAL (B/
Check that the unit’s operating voltage is  G or D/K), MESECAM (B/G or D/K), and
identical with your local power supply.  NTSC 4.43 colour systems.
• If anything falls into the cabinet, unplug the
unit and have it checked by qualified
personnel before operating it any further.
• The unit is not disconnected from the mains
as long as it is connected to the mains, even
if the unit itself has been turned off.
• Unplug the unit from the wall outlet if you
do not intend to use it for an extended
period of time.  To disconnect the cord, pull
it out by the plug, never by the cord.
Installing
• Allow adequate air circulation to prevent
internal heat buildup.
• Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains,
draperies) that may block the ventilation
slots.
• Do not install the unit near heat sources
such as radiators or air ducts, or in a place
subject to direct sunlight, excessive dust,
mechanical vibration or shock.
• Do not install the unit in an inclined
position.  It is designed to be operated in a
horizontal position only.
• Keep the unit and cassettes away from
equipment with strong magnets, such as
microwave ovens or large loudspeakers.
• Do not place heavy objects on the unit.
• If the unit is brought directly from a cold to
a warm location, moisture may condense
inside the VCR and cause damage to the
video head and tape.  When you first install
the unit, or when you move it from a cold to
a warm location, wait for about three hours
before operating the unit.
2  Introduction

Table of contents
Getting Started
4 Step 1: Unpacking
5 Step 2: Setting up the remote commander
7 Step 3: Connecting the VCR
10 Step 4: Tuning your TV to the VCR                                   Getting Started
12 Step 5: Setting up the VCR with the Auto Set Up function
14 Step 6: Setting the clock
16 Selecting a language
17 Presetting channels
21 Changing/disabling programme positions
Basic Operations                    Additional Information
25 Playing a tape                   48 Troubleshooting
28 Recording TV programmes          51 Specifications
31 Recording TV programmes using    52 Index to parts and controls
the timer                       Back cover
Index
Additional Operations
34 Playing/searching at various
speeds
36 Setting the recording duration
time
37 Checking/changing/cancelling
timer settings
39 Searching using the Smart Search
function
42 Adjusting the picture
44 Changing menu options
46 Editing with another VCR
Introduction  3